News & Blog
Common Problems and Solutions of Handheld Laser Welding Machine

Common Problems and Solutions of Handheld Laser Welding Machine

in actual operation, handheld laser welding performance are easily affected by parameter setting, workpiece status, equipment maintenance and other factors, and various problems occur

13

2026

/

01

Application of Laser Cutting in Medical Stents

Application of Laser Cutting in Medical Stents

An ultrashort pulse laser cutting machine has been adopted. With pulse widths ranging from 10 picoseconds (10-12 seconds) to hundreds of femtoseconds (10-15 seconds), it allows for near-thermal-free "cold" processing on medical stents

12

2026

/

01

The Advantages of Fiber Laser Cutting Machine

The Advantages of Fiber Laser Cutting Machine

The standard cutting area of the high-precision fiber laser cutting machine is 600mm*600mm. It is primarily designed for high-speed hole cutting and edge trimming of various thin metal sheets under 5mm thick, with a cutting accuracy up to ±0.003mm.

05

2026

/

01

Precautions for Using lasers with Chiller in Winter

Precautions for Using lasers with Chiller in Winter

Recently, due to the widespread cold air across the country, there are some precautions for using lasers with chiller in winter. If the external ambient temperature is too low, the volume expansion after water freezing will cause irreversible damage to the pipelines and optical cables of the equipment water chiller.

05

2026

/

01

Laser Cleaning In Industrial Applications

Laser Cleaning In Industrial Applications

The laser cleaning machine is an efficient and environmentally friendly surface cleaning equipment that uses a high-energy laser beam to remove contaminants or coatings from the surface of materials, suitable for a wide range of materials and scenarios

29

2025

/

07

The technical advantages of laser welding machine in welding medical cardiovascular stents

The technical advantages of laser welding machine in welding medical cardiovascular stents

Medical cardiovascular stents are usually made of metal materials such as stainless steel and titanium alloys, which have good biocompatibility and mechanical properties. The laser welding machine is able to weld these materials with precision, ensuring the strength and stability of the stent

14

2025

/

07

<1234>
Wuhan Nice Laser Co., Ltd

Hotline

+86-15387106075

Quick links

About Us

Services

Contact

Product Category

Contact Us

+8615387106075

+8615387106075

mike@nice-laser.com

No.18, Liu Fang Yuan South Road, Eastlake High-Tech Development Zone, Wuhan, Hubei, 430205, China.

Wuhan Nice Laser Co., Ltd

Hotline

+86-15387106075

0086-15387106075

mike@nice-laser.com

+8615387106075

15387106075

Wechat